<< Back

No need to wait for Natural Stone to ‘settle down’ - with our water based, non solvent, sealers!

You don't have to wait to seal your Natural Stone with EASYSeal you can seal your paving NOW!

Traditionally landscapers would want to wait about 6 months before sealing natural paving, once it has been laid, to give time for efflorescence (salts) to exit the natural stone.  This is NOT NECESSARY when you seal paving with one of our water based sealers.

Azpects have a superb EASYSeal Range – Sealers designed to make the job in hand quicker, easier or both!

You can seal natural paving before you joint with EASYJoint or after 4 weeks if you decide to Joint your paving first.  

(Visit our EASYJoint page to find out how to joint a patio using EASYJoint).

 

You do not need to worry about efflorescence salts being trapped in the paving or sitting underneath a nasty ‘skin’, that many other sealers can leave behind!  Our natural stone sealers are water based and allow the stone to ‘breathe’ enabling salts and efflorescence to pass through to the surface and wash away.  

As a landscaper this means that you will not have to return to the job several months later to complete the job but can do it all in one go, saving you time and money!  Another key advantage is because the natural stone sealers are water based they can be applied in damp conditions.

(Avoid using in the rain or if rain is forecasted within the next 6 hours though). 

 

EASYSeal SSP

One of our bestselling sealers is ‘SSP’, a natural stone sealer and protector, but we have other sealers for a wide range of situations, colour enhancing sealers, slate and limestone enhancer/sealers and others for concrete and concrete blocks, invisible sealers and hard wearing sealers.  Sealers for timber decking, wet brick walls/garden ornaments and timber fencing sealers, all designed to seal and protect.  Our SSP also impedes algae and moss growth, resists dirt, grime and staining whilst also being pressure washer resistant.  It is hard wearing sealer and virtually invisible. To find out what the best EASYSealer is for your job, click here for our comparison chart.  Always following the instructions on the label and test a sample area first.

 

What do you think about our Sealers? Give us a comment below

Azpects on Facebook https://www.facebook.com/AzpectsLtd/

Azpects on Twitter https://twitter.com/AzpectsLtd

For more information on the EASYSeal range visit: http://www.azpects.co.uk/sealers-and-protectors.aspx

For our full list of products visit: http://www.azpects.co.uk/products.aspx

Got any questions? Azpects offer a Customer & Merchant Support Helpline: +44 (0)1473 760777

 

 


Comments


 

Share