Azpects have introduced another easy to use product into its ever growing EASYRepair Range.
EASYRevive+ is an advanced formula that will seal, protect and rejuvenate asphalt and transform concrete and block paving. It leaves driveways and paths with a deep black finish and looking like new!
It can be used in conjunction with EASY4Cracks or EASY Drivefix+ to give an impressive and professional finish.
Step 1: Thoroughly clean the drive, use a stiff broom to remove loose dirt and debris, if necessary use a deep cleaner from our EASYCare range such as Masonry Cleaner.
Step 2: You will need a tray, long pile roller and brush. Ensure rain is not forecast for at least 24 hours before applying the product.
Step 3: Shake the bottle well and pour the contents into the tray. The 5 litre bottle will cover up to 30m² on a smooth surface however on rough and porous surfaces considerably more will be required.
Step 4: Using the brush to cut-in around the edges, start in one corner and apply a generous coat to the surface.
Step 5: With the roller, starting in one corner, apply a generous coat to the entire area. On uneven surfaces ensure all dents and holes are coated.
Step 6: The first coat should be touch dry after about 4 hours, when you can apply a second coat. Restrict vehicle access for at least 24 hours.
Note: As with all products you should read the instructions carefully and ensure they are followed to achieve the best results.
Watch the Video Below
Got any questions? Azpects offer a Customer & Merchant Support Helpline: +44 (0)1473 760777
For more information on EASY Revive+ visit: http://www.azpects.co.uk/products/easy-revive.aspx
For our full list of products visit: http://www.azpects.co.uk/products.aspx
Leave us a comment below!
Azpects on Facebook: https://www.facebook.com/AzpectsLtd/
Azpects on Twitter: https://twitter.com/AzpectsLtd