<< Back

EASYGrid Ground Preparation/Installation Guidelines

More detailed information on EASYGrid base preparation and laying

EASYGrid is strong, quick and easy to install, here are our guidelines on base preparation and laying of the grid itself.

Base Preparation

Following excavation of the existing ground, a geotextile layer should first be laid to
create ground stability. To ensure optimum drainage, MOT Type 3 (graded crushed
stone) should be used as the sub base layer. MOT Type 1 is not suitable.
Assuming the existing ground is reasonably stable and free draining, a typical base
for a car park would comprise of a compacted 150-200mm deep layer of Type 3.
Bedding (where stone/gravel finish is required)
A non-woven geotextile should be laid on top of the sub-base to act as a
separating layer/weed suppressant. This should then be topped with a 30mm
depth of 4-10mm angular stone or grit sand with another layer of geotextile on top.
The geotextile layer will stop the stone/grit from migrating down into the sub base
and will also inhibit weed growth.
Bedding (where grassed finish is required)
An optional geotextile layer should be laid on top of the sub-base to act as a
separating layer. This should be topped with a 30mm depth of 4-10mm grit sand
with another layer of geotextile on top.

EASYGrid Base Preparation and Laying Diagram

Laying
Lay the pavers starting in the corner of the site. The lugs on the edge of the pavers
should face the direction of installation. Offer the next panel in the same orientation
so that the slots slide on to the lugs on the previous panel. Continue laying pavers
in the desired direction, standing on the laid pavers when laying the next panel.
Any excess can be cut with a hand saw.
Filling
Stone/gravel fill - fill the pavers with free draining hard, angular stone nominal
10-14mm.
Grass fill - fill the pavers with clean friable topsoil or blended loam. Scrape away
any overfill so that the top edges of all cells are visible. Grass seed can be applied
to the finished surface or for best results, mix together with the soil prior to filling.
Suggested grass seed is a mix of 75% perennial rye and 25% creeping red fescue.
Turf can also be rolled into pavers. Please note pavers should not be trafficked until
grass is established.

 

For more information on EASYGrid visit: http://www.azpects.co.uk/products/easygrid-range.aspx

For our full list of products visit: http://www.azpects.co.uk/products.aspx

Azpects on Facebook: https://www.facebook.com/AzpectsLtd

Azpects on Twitter: https://twitter.com/AzpectsLtd

Have you got any questions? Azpects offer a Customer & Merchant Support Helpline (Monday - Friday 09:00 - 17:00) +44 (0)1473 760777

 

 


Comments


 

Share