EASYGrid Ground Preparation/Installation Guidelines Preparation Some excavation of the existing ground may be required to obtain a level surface. A suitable geotextile layer should be laid to increase ground stability and prevent particle migration. A suitable sub-base should be installed where necessary*. Before laying EASYGrid ensure site drainage is adequate. *vehicular parking or thoroughfare, helipad etc. Laying Lay the pavers starting in the corner of the site. The lugs on the edge of the pavers should face the direction of installation. Offer the next panel in the same orientation so that the slots slide on to the lugs on the previous panel. Continue laying pavers in the desired direction, standing on the laid pavers when laying the next panel. Where stone/gravel -nish is required A suitable geotextile should be laid on top of the sub-base to act as a separating layer/weed suppressant. The laid EASYGrid can be filled with your chosen aggregate. Where a grassed -nish is required Fill the EASYGrid with topsoil. This can then be seeded or turfed. (turf may need compressing into the grid to maintain a level surface) White delineators are available for marking out parking spaces or walkways. Important: the performance of EASYGrid as a driveway or parking area is dependent on the quality of the subbase installation. The ground under the grid must be able to withstand the forces put upon it. EASYGrid acts a ground stabiliser and gravel containment product. When installed correctly it will aid weight distribution and reduce rolling and rutting caused by vehicles. All colours of EASYGrid are recyclable, and our black EASYGrid is made of 100% recycled plastic." Membrane Sub-base Membrane EASYGrid Sub Soil
RkJQdWJsaXNoZXIy NDUxNTk=