Sandstone Enhancer & Sealer


Sandstone Enhancer & Sealer

2-in-1 colour protector for natural sandstone paving

  • Specially formulated for sandstone and other natural stone
  • Enriches and enhances colour without shine
  • Injects life back into paths, patios and driveways
  • Protects and seals against water, oil and grease
  • Resists algae and fungal growth
  • Water-based impregnating sealer, apply second coat wet-on-wet
  • 5 litres seals up to 25m2 based on one coat, depending on surface porosity

Find your nearest stockist

Comparison Chart

Sandstone Enhancer & Sealer is a professional-grade water-based, non-solvent solution that enriches, boosts, and enhances the natural colour of your sandstone paving without giving it a false shiny finish. Whilst sandstone Sealer and Enhancer have been designed explicitly for sandstone; it is suitable for sealing and enhancing other types of natural stone. When looking to seal and enhance slate or limestone, we suggest you use our Slate and Limestone Sealer, designed for less porous stone.

Installation Guide

Step 1. Sweep

Brush away leaves and debris.

Step 2. Shake

Shake well before use.

Step 3. Apply

Apply a generous, even coat with a brush, roller, or garden sprayer. Mop up the excess to avoid pooling.

Top Tip! Apply at a rate of 1 litre per 4-5m2.

Step 4. Second Coat

For greater enhancement, apply a second coat before the first coat dries.

Step 5. Finish

Allow 8 hours before walking on the surface and 24 hours for the product to cure completely.



Once dry, the product is pet-safe.

Yes, surfaces need to be clean.

It is best to apply a sealer to a dry surface.